Research on slope reliability analysis using multi-kernel relevance vector machine and advanced first-order second-moment method

Engineering with Computers - To increase the efficiency and accuracy in slope stability analysis, a reliability analysis method based on machine learning and the advanced first-order second-moment...     

高熵形状记忆合金的研究进展

高熵形状记忆合金是在等原子比NiTi合金的基础上,结合高熵合金的概念,逐渐发展起来的一种新型高温形状记忆合金。近年来,已开发出了综合性能优异的(TiZrHf)50(NiCoCu)50系和(TiZrHf)50(NiCuPd)50系高熵形状记忆合金,引起了广泛的关注和研究兴趣。本文从物相组成、微观组织、马氏体相变行为、形状记忆效应和超弹性等角度出发,综述了高熵形状记忆合金的研究进展,并对高熵形状记忆合金未来的研究重点进行了展望。     

放顶煤液压支架在土耳其IMABT煤矿现场的应用

通过对土耳其IMBAT煤矿地质条件的分析研究，结合多种选型计算方法的验证，最终选择了合适的设备，使该矿的开采效率得到较大提升。同时也扩大了我国的煤炭开采装备应用范围。根据在土耳其IMBAT煤矿现场多年的服务经验，将理论与实践相结合，就综采放顶煤液压支架在土耳其IMABT煤矿现场的应用进行了论述。     

基于Hadoop的电力运维审计系统的设计

国家电网公司信息化程度越来越高，单机运维审计系统产生的数据量日益增多，对海量数据高效率存储分析性能严重下降，系统稳定性降低。为满足国家电网当前对运维审计系统数据存储分析以及系统稳定性的需求，在Hadoop开源架构的基础上，本文提出基于Hadoop集群的海量数据分布式存储方法和基于Heartbeat的心跳检测技术，实现基于Hadoop的电力运维审计系统。〖JP2〗实验测试结果表明，基于Hadoop的电力运维审计系统相比单机系统可用性提高了8.42%，大大提升了存储分析海量数据的性能，具有系统工作稳定和服务不间断等优势。     

Experimental Study on Hybrid Organic Phase Change Materials Used for Solar Energy Storage

The solar energy utilization in built environment has been limited due to its low heat flux, uneven distribution in time and space and temporal difference in day and night. The phase change materials have been used to collect the fluctuant solar energy to form a stable energy source for the terminal equipment of the buildings. In this study, the hybrid organic phase change materials was prepared for the capillary radiant heating system which formed a cascade utilization of solar energy. Firstly, lauric acid and stearic acid were selected as the basic organic phase change materials and the binary equilibrium phase diagram was completed based on the method of step cooling curve according to the experimental tests data. The results showed that the phase transition temperature of the mixed acid at the lowest eutectic point was 31.2℃ and the latent heat value was 264.3 kJ/kg when the mass mixing ratio was 70% for lauric acid and 30% for stearic acid. Secondly, the expanded graphite was used as an additive to enwrap the mixed acid and enhance the heat conductivity. The experimental results showed that when the mass proportion of expanded graphite in the mixed acid was 10%, the mixed acid could be completely enclosed by expanded graphite and the stability of melting and solidification was optimal. Additionally, the phase transition temperature of the hybrid phase change material was 31.5℃ and the latent heat value was 217.4 kJ/kg. The novel hybrid phase change material has a lower eutectic point and a higher latent heat of phase change, so it has a large application space and is quite suitable for the cascade utilization of solar energy with capillary network heating system.     

Effect of Temperature and Strain Rate on the Hot Deformation Behaviour of Ferritic Stainless Steel

Metals and Materials International - The flow behaviour and microstructure characteristics of a ferritic stainless steel were investigated using plain strain compression test on a Gleeble 3500...     

Low Li ion diffusion barrier on low-crystalline FeOOH nanosheets and high performance of energy storage

Nano Research - To obtain symmetric supercapacitors (SCs) with high energy density, it is critical to fabricate an electrode with wide potential window and excellent capacitive performance. Herein,...     

Fe基非晶合金增强1060铝基多层复合材料的组织与性能

采用累积叠轧焊+中间退火法复合轧制1060Al/Fe基非晶多层铝合金复合板材。利用光学显微镜、扫描电镜、X-衍射分析仪以及拉伸试验机分析Al基复合材料的微观组织结构变化、断口形貌、物相组成以及力学性能。结果表明:Fe基非晶复合材料的增强体在300 ℃中间退火过程中发生部分晶化,在累积变形轧制过程中发生破碎,并随着变形道次的增加,破碎程度随之增大;复合板前6道次的累积轧制变形出现了明显的加工软化现象,并且随着变形道次的增加,其加工软化的效果愈明显;随着累积轧制变形道次增加,Al基复合材料的力学性能发生了明显的变化,第2道次轧制变形后屈服强度与抗拉强度达到了最大值为140 MPa和156 MPa,伸长率为5.53%,达到最佳综合性能。